Heat Pump Rebate, Price, and How It Works: A Comprehensive Guide

What Is a Heat Pump, and How Does It Work?

What Is a Heat Pump and How Does It Function Efficiently? Heat pumps, a well-established technology utilized for decades both in Canada and worldwide, offer an efficient solution for providing heating, cooling, and sometimes hot water to various buildings. In fact, you likely encounter heat pump principles regularly in your daily life, as refrigerators and air conditioners operate based on the same principles and mechanisms. This section presents the fundamental workings of heat pumps and introduces different system types.

Key Concepts of Heat Pumps A heat pump is an electrically powered device designed to extract heat from a lower temperature location (a source) and transfer it to a higher temperature location (a sink).

To grasp this process, consider a bicycle ride over a hill: Traveling from the hill’s peak to its base requires no exertion, as the bike and rider naturally move from a higher position to a lower one. However, ascending the hill demands considerable effort, as the bike moves against the natural direction of motion.

Likewise, heat naturally flows from warmer places to cooler ones (for instance, during winter, indoor heat dissipates to the outside). A heat pump employs added electrical energy to counteract the natural heat flow and transport energy from a colder place to a warmer one.

So, how does a heat pump either heat or cool your dwelling? As energy is extracted from a source, the source’s temperature drops. If your home serves as the source, it loses thermal energy, resulting in cooling. This cooling operation is akin to the functioning of air conditioners and refrigerators. Similarly, as energy is introduced to a sink, the sink’s temperature rises. If your home acts as the sink, it gains thermal energy, thereby heating the space. A heat pump can fully reverse this process, allowing it to both warm and cool your residence, ensuring year-round comfort.

Sources and Sinks for Heat Pumps The selection of source and sink for your heat pump system significantly impacts its performance, initial costs, and operational expenses. This section offers a concise overview of common sources and sinks used in residential heat pump applications in Canada.

Sources: For heating homes with heat pumps in Canada, two primary sources of thermal energy are frequently employed:

Air Source: During the heating season, the heat pump draws warmth from the external air and releases heat outside during the cooling period of summer. It may be surprising to note that even in cold outdoor temperatures, a substantial amount of extractable energy remains available. For instance, the heat content of air at -18°C corresponds to 85% of that at 21°C. This enables the heat pump to provide effective heating even in colder conditions. Air-source systems are prevalent in the Canadian market, with more than 700,000 units installed nationwide. This type of system is discussed further in the Air-Source Heat Pumps section.

Ground Source: Ground-source heat pumps utilize the earth, groundwater, or a combination of both as heat sources during winter and as heat reservoirs for removing heat from homes during summer. While less common than air-source units, these heat pumps are gaining popularity across all Canadian provinces. Their primary advantage lies in their stability against extreme temperature fluctuations, as they rely on the earth’s constant temperature. This results in the most energy-efficient type of heat pump system. This type of system is detailed in the Ground-Source Heat Pumps section.

Sinks: For heating homes with heat pumps in Canada, two primary sinks for thermal energy are commonly used:

Indoor air is heated by the heat pump, achieved through either a centrally ducted system or a ductless indoor unit such as a wall-mounted unit.

Water inside the building is heated, which can subsequently serve terminal systems such as radiators, radiant floors, or fan coil units through a hydronic system.

Discovering the Power of Heat Pumps for Optimal Energy Use

Discovering the Power of Heat Pumps for Optimal Energy Use

In the realm of space heating solutions, conventional furnaces and boilers have long been relied upon to elevate indoor temperatures by harnessing the energy released from fuels like natural gas and heating oil. Despite ongoing advancements in efficiency, these systems continue to fall short of achieving 100% energy utilization, leaving untapped potential within the combustion process.

Enter the innovative realm of heat pumps, where a fresh approach to energy transfer takes center stage. Instead of traditional combustion, heat pumps leverage electrical input to facilitate the seamless exchange of thermal energy between two distinct locations. This groundbreaking principle paves the way for remarkably heightened efficiency levels, often surpassing the 100% mark. In simple terms, heat pumps produce more thermal energy than the electric energy they consume in the transfer process.

However, it’s essential to grasp that the efficiency of a heat pump is intricately linked to the temperature differentials between its heat source and heat sink. Much like navigating a steep incline on a bicycle demands increased effort, greater temperature variations necessitate heightened exertion from the heat pump, potentially impacting its efficiency. Mastering the art of selecting an appropriately sized heat pump emerges as a crucial strategy for maximizing seasonal efficiency. Delve deeper into the nuances of this topic within the dedicated sections on Air-Source Heat Pumps and Ground-Source Heat Pumps.

Unveil the secrets behind heat pump efficiency, and unlock the potential for transformative energy utilization in your space heating endeavors.

Efficiency Metrics Decoded: A Guide for the Inquisitive Buyer Demystifying Heat Pump Efficiency Terminology for Seamless Understanding

 

Navigating the realm of heat pump efficiency can be a perplexing journey, especially for those entering the market for the first time. Manufacturers’ catalogs often present an array of efficiency metrics, creating a labyrinth of confusion. Fear not, for below lies an elucidation of the commonly encountered efficiency terms:

In-Depth Insights into Steady-State Metrics: Understanding efficiency in a ‘steady-state’ scenario, devoid of real-world fluctuations in seasons and temperatures, is pivotal. Keep in mind that these metrics can undergo significant transformations as operational parameters, source and sink temperatures shift. Steady-state metrics encompass:

Coefficient of Performance (COP): Think of COP as the relationship between the heat pump’s thermal energy transfer rate (measured in kW) and the electrical power input required for this transfer (measured in kW). Imagine a heat pump employing 1 kW of electrical energy to transfer 3 kW of heat – in this case, the COP stands at 3.

Energy Efficiency Ratio (EER): Similar to COP, EER focuses on steady-state cooling efficiency. It calculates by dividing the heat pump’s cooling capacity in Btu/h by the electrical energy input in Watts (W) at a specific temperature. Unlike COP, EER exclusively assesses steady-state cooling efficiency and doesn’t encompass heating performance.

Diving into Seasonal Performance Metrics: To capture a holistic perspective of performance during heating or cooling seasons, metrics accounting for “real life” temperature variations emerge as essential.

Embracing seasonal metrics:

Heating Seasonal Performance Factor (HSPF): HSPF is a ratio quantifying the energy delivered by the heat pump to the building throughout the heating season (in Btu), compared to the total energy consumption (in Watt-hours) over the same span.

HSPF calculations incorporate long-term climate data to mirror heating season variations. Although typically tailored to a single region (usually Region 4, resembling the Midwestern US), some manufacturers can provide HSPF values for distinct climates upon request. Region 5 corresponds to a swath of Canada encompassing the southern provinces, from British Columbia’s interior to New Brunswick.

Seasonal Energy Efficiency Ratio (SEER): SEER gauges cooling efficiency over an entire cooling season. It gauges by dividing the total cooling furnished during the season (in Btu) by the aggregate energy consumption of the heat pump (measured in Watt-hours).

SEER’s foundation lies in a climate featuring an average summer temperature of 28°C, providing insights into cooling performance.

Unlock the treasures concealed within heat pump efficiency terminology, empowering you to make informed decisions as you embark on your purchasing journey.

Air Source Heat Pumps: A Comprehensive Guide

 

Air-source heat pumps harness the outdoor air’s thermal energy for heating and act as a heat sink for cooling purposes. This versatile system falls into two primary categories:

1. Air-Air Heat Pumps: These systems heat or cool indoor air and are predominant in Canadian air-source heat pump setups. They can be further categorized based on installation type:

   • Ducted: The heat pump’s indoor coil is positioned within a duct. Air passes over the coil, heating or cooling it, before being distributed through the home’s ductwork to various areas.

   • Ductless: The heat pump’s indoor coil is situated in a unit within the living space, often mounted on walls or floors. These units directly heat or cool the air within the space. Ductless systems can be divided into mini-split and multi-split variations:

     • Mini-Split: One indoor unit connected to a single outdoor unit.

     • Multi-Split: Several indoor units linked to a single outdoor unit.

Air-air systems perform optimally when the indoor-outdoor temperature differential is minimal. To enhance efficiency, these systems focus on delivering a greater volume of slightly warmer air, typically ranging from 25°C to 45°C. This is unlike furnace systems, which produce less air but at higher temperatures (55°C to 60°C). Shifting from a furnace to a heat pump might highlight these differences.

2. Air-Water Heat Pumps: Less common in Canada, air-water heat pumps manipulate water for heating and cooling, suited for homes equipped with hydronic (water-based) distribution systems like radiant floors, low-temperature radiators, or fan coil units. In heating mode, the heat pump warms the hydronic system, and in cooling mode, it extracts thermal energy from the hydronic system and dissipates it outdoors.

Critical to air-water heat pumps is the hydronic system’s operating temperature. These systems thrive when heating water to lower temperatures, below 45-50°C, making them ideal for radiant floors and fan coil systems. However, caution is needed if considering them for high-temperature radiators requiring water above 60°C, as this often exceeds residential heat pump limits.

Key Advantages of Air-Source Heat Pumps

Adopting an air-source heat pump offers an array of benefits, particularly in terms of energy efficiency. Explore the advantages of integrating air-source heat pumps into your energy consumption strategy.

1. Efficiency: A primary advantage lies in the impressive heating efficiency compared to traditional systems such as boilers, furnaces, and electric baseboards. At 8°C, air-source heat pumps exhibit a coefficient of performance (COP) ranging from 2.0 to 5.4. A COP of 5 signifies that 5 kWh of heat are generated for every kWh of electricity supplied. As outdoor temperatures drop, COPs decrease due to larger indoor-outdoor temperature gaps. At -8°C, COPs can range from 1.1 to 3.7.

2. Energy Savings: The heightened efficiency directly translates to substantial energy savings. The extent of savings hinges on factors like local climate, current system efficiency, heat pump size and type, and control strategies. Numerous online calculators can offer quick estimations of potential energy savings based on your specific scenario. NRCan’s ASHP-Eval tool, accessible to installers and mechanical designers, can provide valuable insights for your situation.

Keep in mind that these estimations are based on an Ottawa-like climate and that actual savings are contingent on your heat pump’s installation location.

Incorporating an air-source heat pump can revolutionize your heating and cooling efficiency, significantly reducing your energy consumption and environmental impact. To fully capitalize on these advantages, tailor your system choice to your specific needs and consult resources like NRCan’s ASHP-Eval tool for personalized guidance.

Air Source Heat Pump Operation: Unveiling the 3 Essential Cycles

Understanding how an air-source heat pump operates is key to harnessing its energy-efficient benefits. This system revolves around three pivotal cycles:

1. The Heating Cycle: Fueling Building Comfort with Thermal Energy

   During the heating cycle, the air-source heat pump extracts warmth from the outdoor air, even in colder temperatures. This heat is then transferred indoors, effectively warming up your living space. The process involves a refrigerant fluid that undergoes compression and expansion, enabling it to absorb and release heat efficiently. As a result, your home stays cozy even when the temperature drops.

2. The Cooling Cycle: Banishing Excess Heat to Ensure Comfort

   In the cooling cycle, the heat pump takes on a reverse role. It removes unwanted thermal energy from your indoor environment, effectively cooling the air and maintaining a pleasant temperature indoors. This cycle uses the same refrigerant fluid, which alternates between absorbing and releasing heat, ensuring your home remains a haven of comfort during warmer seasons.

3. The Defrost Cycle: Battling Frost for Optimal Performance

   As outdoor coils encounter chilly conditions, frost buildup can hinder the heat pump’s efficiency. To combat this, the defrost cycle comes into play. When sensors detect frost accumulation, the system temporarily reverses its operation. By heating up the outdoor coils, accumulated frost melts away. This swift defrosting mechanism guarantees optimal performance and prevents any hindrance to your heat pump’s efficiency.

By delving into these three crucial cycles, you gain a comprehensive grasp of how an air-source heat pump operates. This understanding empowers you to make the most of its heating and cooling capabilities, ensuring a comfortable and energy-efficient living environment. Should you have further questions or seek professional assistance, don’t hesitate to reach out to experts in the field.

   

Contact Us

 

Full Name* Email* Message*

Send Message

Supplementary Heat Sources

Since air-source heat pumps have a minimum outdoor operating temperature (between -15°C to -25°C) and reduced heating capacity at very cold temperatures, it is important to consider a supplemental heating source for air-source heat pump operations. Supplementary heating may also be required when the heat pump is defrosting. Different options are available:

• All Electric: In this configuration, heat pump operations are supplemented with electric resistance elements located in the ductwork or with electric baseboards. These resistance elements are less efficient than the heat pump, but their ability to provide heating is independent of outdoor temperature.
• Hybrid System: In a hybrid system, the air-source heat pump uses a supplemental system such as a furnace or boiler. This option can be used in new installations, and is also a good option where a heat pump is added to an existing system, for example, when a heat pump is installed as a replacement for a central air-conditioner.

See the final section of this booklet, Related Equipment, for more information on systems that use supplementary heating sources. There, you can find discussion of options for how to program your system to transition between heat pump use and supplementary heat source use.

Enhancing Energy Efficiency: Key Considerations Unveiled

To grasp the essence of this segment, make sure to revisit the preceding section titled “An Insight into Heat Pump Efficiency.” There, you’ll find a comprehensive explanation of the significance of HSPFs and SEERs.

In Canada, stringent energy efficiency regulations mandate a minimum level of seasonal effectiveness for both heating and cooling. Products must meet these standards to be eligible for sale in the Canadian market. Moreover, it’s worth noting that your specific province or territory might impose even more rigorous criteria.

Below, we’ve summarized the essential performance benchmarks for both cooling and heating, encompassing the entirety of Canada as well as the typical ranges found in available market products. As you embark on the journey of selecting your system, remember to verify whether any supplementary regulations pertain to your geographical area.

Cooling Seasonal Performance, Measured by SEER:

• Minimum SEER (Canada): 14
• SEER Range Among Market Offerings: 14 to 42

Heating Seasonal Performance, Gauged by HSPF:

• Minimum HSPF (Canada, Region V): 7.1
• HSPF Range Among Market Offerings (Canada, Region V): 7.1 to 13.2

Kindly note that the provided HSPF values are tailored to AHRI Climate Zone V, mirroring Ottawa’s climate conditions. It’s essential to acknowledge that the actual seasonal efficiencies can fluctuate based on your specific region. An updated performance standard is currently in the works to offer a more accurate representation of these systems’ performance across diverse Canadian locales.

These SEER and HSPF values are influenced by an array of factors primarily rooted in heat pump design. Over the past 15 years, the landscape of performance has experienced significant evolution, driven by groundbreaking advancements in compressor technology, heat exchanger design, and the optimization of refrigerant flow and control mechanisms. As you navigate through the realm of energy-efficient solutions, keep in mind the dynamic nature of heat pump performance and the continuous strides toward efficiency enhancements.

Single Speed vs. Variable Speed Heat Pumps: Elevating Efficiency

Delving into efficiency considerations, a pivotal factor to explore is the transformative impact of novel compressor designs on seasonal performance enhancements. Typically, units adhering to the minimum SEER and HSPF benchmarks often employ single speed heat pumps. However, the landscape has evolved with the emergence of variable speed air-source heat pumps, meticulously engineered to dynamically adjust the system’s capacity in alignment with the house’s heating and cooling requirements. This adaptive approach ensures peak efficiency is sustained consistently, even during milder weather conditions that impose reduced demand on the system.

A recent stride in the industry introduces air-source heat pumps optimized for the harsh Canadian climate. These cutting-edge systems, often referred to as cold climate heat pumps, combine the prowess of variable capacity compressors with refined heat exchanger designs and advanced controls. This synergy empowers the system to achieve heightened heating capacity even when tackling colder air temperatures, all the while maintaining remarkable efficiency levels during less extreme conditions. These pioneering systems typically boast elevated SEER and HSPF values, with select models soaring to SEERs reaching up to an impressive 42, and HSPFs nearing an enviable 13.

This evolution in heat pump technology signifies a significant leap forward, ushering in enhanced efficiency and performance benchmarks for the modern homeowner. Embrace the options that align with your needs, and be attuned to the ever-evolving landscape of energy-efficient solutions.

Certification, Guidelines, and Evaluation Metrics

In the realm of heat pumps, ensuring safety and efficiency is paramount. The Canadian Standards Association (CSA) plays a crucial role by meticulously certifying all heat pumps for electrical safety. But that’s not all – a robust performance standard guides the evaluation process, outlining rigorous tests and precise conditions under which heat pump capacities and efficiency are rigorously assessed.

For air-source heat pumps, the cornerstone of evaluation lies in CSA C656, a definitive set of standards that has been harmoniously aligned with ANSI/AHRI 210/240-2008. This harmonization, initiated in 2014, brings together Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment. It’s a significant step forward, replacing the previous CAN/CSA-C273.3-M91, which delineated Performance Standards for Split-System Central Air-Conditioners and Heat Pumps.

In essence, this marks a comprehensive framework, meticulously designed to ensure that the performance, safety, and efficiency of heat pumps meet the highest standards. The combined force of CSA C656 and ANSI/AHRI 210/240-2008 paves the way for heat pump solutions that stand up to scrutiny and deliver exceptional outcomes. As you embark on your journey to select the ideal heat pump, rest assured that these robust standards are diligently at work, safeguarding your investment and optimizing your comfort.

Optimal Sizing Guidelines for Heat Pump Systems

Accurate sizing of your heat pump system forms the bedrock of efficiency and comfort in your home. Understanding your residence’s heating and cooling requirements is fundamental, and enlisting the expertise of a heating and cooling professional is strongly advised for precise calculations. These professionals employ recognized sizing methodologies, such as CSA F280-12, “Determining the Required Capacity of Residential Space Heating and Cooling Appliances.”

When determining the size of your heat pump system, several factors come into play, including your local climate, the heating and cooling demands of your building, and your installation goals. This might involve maximizing heating energy savings or complementing an existing system during specific periods. NRCan has devised an invaluable resource, the Air-Source Heat Pump Sizing and Selection Guide, accompanied by an intuitive software tool. Aimed at energy advisors and mechanical designers, these resources offer indispensable insights for achieving accurate sizing decisions.

An undersized heat pump system might trigger the frequent use of supplementary heating, potentially offsetting the expected energy savings. Although still operational, the efficiency gains could be compromised. Conversely, an oversized heat pump might miss the mark on projected energy savings due to inefficient operation during milder conditions. While the supplementary heating system kicks in less often, an oversized heat pump can lead to discomfort, wear on the unit, and standby power usage as it cycles excessively.

To attain optimal energy savings, a deep grasp of your heating load and the heat pump’s operational dynamics is pivotal. By adhering to these comprehensive sizing considerations, you’re poised to harness the full potential of your heat pump system, elevating efficiency and ensuring enduring comfort in your abode.

Other Selection Criteria

Apart from sizing, several additional performance factors should be considered:

• HSPF: Select a unit with as high an HSPF as practical. For units with comparable HSPF ratings, check their steady-state ratings at –8.3°C, the low temperature rating. The unit with the higher value will be the most efficient one in most regions of Canada.
• Defrost: Select a unit with demand-defrost control. This minimizes defrost cycles, which reduces supplementary and heat pump energy use.
• Sound Rating: Sound is measured in units called decibels (dB). The lower the value, the lower the sound power emitted by the outdoor unit. The higher the decibel level, the louder the noise. Most heat pumps have a sound rating of 76 dB or lower.

Optimal Installation Considerations for Air-Source Heat Pumps

When it comes to air-source heat pumps, a successful installation hinges on the expertise of a qualified professional. Engaging a local heating and cooling specialist is crucial not only for proper sizing, installation, and maintenance but also to ensure the seamless and effective operation of your equipment. If your intention is to integrate a heat pump to complement or replace your central furnace, it’s important to note that heat pumps typically operate at higher airflows compared to furnace systems. Depending on your new heat pump’s dimensions, you might need to make adjustments to your ductwork to mitigate additional noise and minimize fan energy usage. Rely on your chosen contractor to offer tailored advice specific to your circumstances.

The financial outlay for an air-source heat pump installation is influenced by several factors, including the system type, your design objectives, and any pre-existing heating equipment and ductwork in your dwelling. In certain instances, modifications to your ductwork or electrical services might be necessary to support the seamless integration of your new heat pump. These modifications, while potentially adding some extra steps to the process, are pivotal in ensuring optimal performance and efficiency.

In essence, entrusting the installation of your air-source heat pump to a seasoned professional guarantees that you unlock the full potential of this energy-efficient solution. By tailoring the installation to your unique situation, you’ll be rewarded with a system that not only meets your heating and cooling needs but also operates seamlessly and optimally in the context of your home.

Essential Heat Pump Maintenance Guidelines for Optimal Performance

A well-maintained heat pump is the cornerstone of efficient, reliable, and enduring operation. Safeguarding your investment and ensuring peak performance requires diligent care. To this end, enlisting the expertise of a qualified professional for annual maintenance is paramount – a step that guarantees every component is in optimal working condition.

Beyond scheduled annual maintenance, there are simple yet impactful actions you can take to uphold consistent efficiency and reliability. Regularly swapping or cleaning your air filter every 3 months is pivotal. A clogged filter obstructs airflow, potentially compromising your system’s efficiency. Additionally, maintain unobstructed airflow around your home by ensuring that vents and air registers aren’t hindered by furniture or carpets. Adequate airflow to and from your unit is essential, as insufficient airflow can curtail equipment longevity and dampen system efficiency.

Incorporating these maintenance practices ensures your heat pump operates at its peak, delivering on its promise of efficiency and reliability. By committing to these measures, you guarantee not only optimal performance but also extend the longevity of your heat pump, ultimately safeguarding your comfort and investment.

Cost Considerations and Energy Savings

Embarking on the heat pump journey promises not only enhanced comfort but also potential reductions in your monthly energy expenditures. The extent of these savings hinges on the interplay between electricity costs and alternative fuels like natural gas or heating oil, as well as the context of your retrofit application – including the system being replaced.

Comparatively, heat pumps entail a higher upfront cost, primarily attributed to their intricate system components. While systems like furnaces or electric baseboards present more economical options, the comprehensive benefits of heat pumps are achieved through their long-term efficiency gains. In certain locales and scenarios, the initial investment can be recuperated in a relatively brief span, thanks to the tangible utility cost reductions. However, divergent utility rates across regions might extend this payback period.

Navigating this intricate landscape necessitates collaboration with your contractor or energy advisor. They can provide you with a comprehensive evaluation of the heat pump economics specific to your area, shedding light on the potential savings that await. With this insight, you can make informed

 

decisions that balance upfront costs against the enticing prospect of enduring energy savings. Your journey to cost-effective comfort begins with a thorough understanding of the economic nuances in your locality.

 

Longevity and Warranty Insights

When it comes to air-source heat pumps, they boast a commendable service life that typically spans 15 to 20 years. Within this framework, the compressor emerges as the linchpin, playing a pivotal role in the system’s performance and longevity.

For added assurance, most heat pumps are accompanied by a comprehensive warranty package. This generally comprises a one-year warranty encompassing both parts and labor. Beyond this, an extended warranty, usually spanning five to ten years, covers the compressor (limited to parts only). It’s important to note that warranty terms can vary significantly from one manufacturer to another, underscoring the importance of delving into the finer details.

While air-source heat pumps offer enduring performance, the added peace of mind from warranties ensures your investment is safeguarded. Remember to explore the specifics of warranties when selecting your heat pump, as they offer a valuable safety net for your system’s longevity and optimal operation.

Heat Pump Price

Heat pump prices can vary significantly based on factors such as brand, capacity, efficiency, and additional features. On average, you can expect the cost of a heat pump to fall within the range of $10,000 to $16,000. While this might seem like a significant investment upfront, it’s essential to consider the long-term benefits and savings that come with this energy-efficient solution.

Calculating Potential Savings:

One of the most appealing aspects of heat pumps is their potential for substantial energy savings. Heat pumps work by transferring heat from the air or ground to warm your home during the winter and extracting heat from indoors to cool your home during the summer. This process is highly efficient, as it doesn’t rely on burning fuel to generate heat.

When compared to traditional heating and cooling systems, heat pumps can help you save on your monthly energy bills. Over time, these savings can offset the initial investment, making heat pumps a financially wise choice.

Government Rebates: Maximize Your Investment:

As an added incentive to make your home more energy-efficient, many governments offer rebates for installing heat pumps. Currently, the government is providing a generous rebate of $7,100, making your decision to switch to a heat pump even more affordable. This rebate can significantly reduce the upfront cost and accelerate your return on investment.

Choosing Airtronic Heating & Cooling:

When it comes to installing a heat pump and maximizing your savings, Airtronic Heating & Cooling is your trusted partner. With years of experience in the industry, we have garnered a reputation for delivering top-notch service and unmatched expertise. Our team of skilled professionals understands the nuances of heat pump installation, ensuring your system operates at its peak efficiency.

Don’t just take our word for it – our satisfied customers have left glowing reviews on both Google and Homestars. These testimonials highlight our commitment to excellence, customer satisfaction, and reliable service. Before making your decision, take a moment to read what our customers are saying about us.

Conclusion:

Investing in a heat pump for your home can provide you with a comfortable living environment while reducing your energy bills and carbon footprint. With heat pump costs ranging from $10,000 to $16,000 and a government rebate of $7,100, the decision becomes even more appealing. For a free estimate and exceptional service, contact Airtronic Heating & Cooling. Explore our reviews on Google and Homestars to see firsthand the positive experiences our customers have had. Make the smart choice for your home’s heating and cooling needs – choose Airtronic Heating & Cooling and embrace the benefits of a heat pump today.

Reviews  5/5 Saeed was able to repair our A/C unit without a hiccup. We had someone else come in prior to him and they couldn’t figure out our system after an hour and a half of being there! Saeed came in and was very knowledgeable and was able to fix it in less than 5 min!!! He is very professional and I recommend him whole heartedly. Thank you Saeed for coming to see us the same day we called. Also, we chose him based on his reviews and he was 💯 true to his reviews. Marianne Home Owner The new furnace was installed within 2 days of my initial contact with Mir. I received a great price and the service and installation went way beyond my expectations. I’m still waiting for a quote from a contractor whose initial “ball park quote” was approximately $7500 + hst for a new furnace or $2700 to replace the main board on my old furnace. Thanks for the excellent work Mir! Mike Home Owner