![](https://airtronic.ca/wp-content/uploads/2024/05/RNC5-3.png)
RNC5-TPD HRV – TOP PORT
Best selling HRV of all time. Combines great performance in a compact design with very competitive pricing.
FEATURES
- Door Port Balancing & adjustable dampers
- Excellent low temperature performance
- Controller with 5-speed, 4-mode operation, included
- Two independent motorized impellers
- The crossflow heat exchanger balances efficiency, compact size and excellent cold temperature performance
- Each core is tested to ensure very low leakage
- Latched door to allow easy access to core and filters for cleaning. 25″ clearance recommended.
- 20 GA pre-paint galvanized steel case
- 3/4″ foil face Styrofoam & insulation
- Washable filters on supply and exhaust
![](https://airtronic.ca/wp-content/uploads/2024/05/RNC155.png)
RNC155 HRV – SIDE/TOP PORT
Door Port Balancing and 3 select high speed settings. Featuring our patented HEX core.
FEATURES
- Door Port Balancing & adjustable dampers
- Excellent low temperature performance.
- Controller with 5-speed, 4-mode operation, included
- Two blowers with common double shaft PSC motor
- HEX CORE is a counter flow heat exchanger that ensures maximum heat transfer, low pressure loss, constructed of thermally conductive and durable aluminum
- Each core is tested to ensure very low leakage
- Latched door to allow easy access to core and filters for cleaning. 25″ clearance recommended.
- 20 GA pre-paint galvanized steel case
- 3/4″ foil face Styrofoam insulation
- Washable filters on supply and exhaust
![](https://airtronic.ca/wp-content/uploads/2024/05/RNC5-3-1.png)
RNC5-HEX-TPF HRV – TOP PORT
Featuring the patented HEX Core. The RNC5-HEX-TPF units offer higher efficiency with all the same great features as the RNC5 units. The units exceed EnergyStar requirements and exceed SRE for energy efficient homes/builders package.
FEATURES
- Door Port Balancing & adjustable dampers
- Excellent low temperature performance
- Two independent motorized impellers
- HEX CORE is a counter flow heat exchanger that ensures maximum heat transfer, low pressure loss, constructed of thermally conductive and durable aluminum
- Each core is tested to ensure very low leakage
- Latched door to allow easy access to core and filters for cleaning. 25″ clearance recommended.
- 20 GA pre-paint galvanized steel case
- 3/4″ foil face Styrofoam & insulation
- Washable filters on supply and exhaust
![](https://airtronic.ca/wp-content/uploads/2024/05/co-1-side.png)
CONSTRUCTO 1.0 HRV – SIDE PORT
This compact, lightweight, and powerful unit is the ideal choice for small single-family homes, high rise residential building and other limited space applications. It is the only air exchanger of its size that can be upgraded from an HRV to an ERV, simply by changing its core.
FEATURES
- Constructo 1.0 HRV is the most versatile 98-cfm unit available on the market today
- Removable terminal block to ease auxiliary wall control connections
- Integrated pressure taps, if balancing required by building code
- Twin high-pressure blowers
- The only ERV providing 120 CFM on the market
- ENERGY STAR certified
- Low profile construction for ceiling mount in closet or above hot water tank
- Equipped with integrated balancing and backdraft dampers in its exhaust to outside and fresh air supply ports
![](https://airtronic.ca/wp-content/uploads/2024/05/hrv-ecm.png)
X30HRV ECM HRV – TOP PORT
New X Series that combines the best performance with the best energy efficiency to provide fresher, purer air in your home at a lower overall operating cost.
FEATURES
- Mid to large size homes in need for the most energy-efficient ventilation solution
- Up to 250 CFM at 0.4 in. w.g.
- High efficiency heat recovery core with a sensible recovery efficiency of 75% at 0°C and 66% at -25°C
- Minimal power consumption of 18W and CFM/Watt of 3.6 at 64 CFM
- Merv 6 grade filters and optional HEPA filtration
- Electronic balancing and no balancing dampers
![](https://airtronic.ca/wp-content/uploads/2024/05/ERV.png)
330ERV – COMMERCIAL ERV
Enthalpy core unit i ideal for warm humid areas with heavy air conditioner use. ERV will transfer water vapor from supply to exhaust reducing AC load.
FEATURES
- The cross-flow energy recovery core transfers heat and water vapour between the two airstreams
- Reversible access, E-box can be located on either side
- Microprocessor circuit board with built in interlock contacts
- 2″ pleated MERV 8 filter in supply and exhaust air streams
- Temperature sensor activated, periodically shuts down supply motor. Drains not required
- Mounting – Saddle or curb mounted
- Insulation – 3/4″ EPS Foil Face
- Case – 20GA Galv. Prepaint
![](https://airtronic.ca/wp-content/uploads/2024/05/com-erv.png)
730ERV – COMMERCIAL ERV
Enthalpy core unit i ideal for warm humid areas with heavy air conditioner use. ERV will transfer water vapor from supply to exhaust reducing AC load.
FEATURES
- The cross-flow energy recovery core transfers heat and water vapour between the two airstreams
- Reversible access, E-box can be located on either side
- Microprocessor circuit board with built in interlock contacts
- 2″ pleated MERV 8 filter in supply and exhaust air streams
- Temperature sensor activated, periodically shuts down supply motor. Drains not required
- Mounting – Saddle or curb mounted
- Insulation – 3/4″ EPS Foil Face
- Case – 20GA Galv. Prepaint
![](https://airtronic.ca/wp-content/uploads/2024/05/erv-top.png)
C12 ERV – TOP PORT
This powerful, versatile and efficient unit is the perfect choice for small single family homes, residential towers and other small-area residences.
FEATURES
- Low profile construction for ceiling mount in closet or above hot water tank
- Installation is fast and versatile, thanks to the selection of vertical or horizontal ports models
- Uses a unique defrosting method that prevents ice build-up on recovery module without creating negative indoor air pressure
- ENERGY STAR® certified*.